[Tim1300Turbo]

Greetings from Australia,

My MB Trac 1300 Turbo is very unresponsive in the throttle/accelerator control.
The air valve in the pedal footwell leeks air quite a bit, and the motor wont return to idle very quickly.
Should I try to source parts to fix the air controlled throttle or try and engineer a linkage system?
Parts are hard to come by here in Australia.

Thankyou in advance

Tim

[Roby]

Hi Tim,

It is easier to repair the existing system and keeping the Trac in original state.
Here some Threads about the " Luftgas /pneumatisches Gas"

https://www.trac-technik.de/Forum/showth...#pid123483

https://www.trac-technik.de/Forum/showth...#pid129401
https://www.trac-technik.de/Forum/showth...7#pid98707 Post#20

Here you can buy the Mastercylinder or perhaps Bernd can make you an offer?

Greetings
Roby

[Tim1300Turbo]

Hi Tim,

It is easier to repair the existing system and keeping the Trac in original state.
Here some Threads about the " Luftgas /pneumatisches Gas"

https://www.trac-technik.de/Forum/showth...#pid123483

https://www.trac-technik.de/Forum/showth...#pid129401
https://www.trac-technik.de/Forum/showth...7#pid98707 Post#20

Here you can buy the Mastercylinder or perhaps Bernd can make you an offer?

Greetings
Roby

Hi Roby,
Thankyou for the great information. I will see if the parts are available in Australia?
I would like to keep the TRAC as original as possible.

Greetings.
Tim